B6 Auxiliary LED License Plate Brake light
Code: DNL.B6.10000Product detailed description
The B6 Smart LED Brake Light has been designed to produce the most light from the smallest profile. Six 1.0W LEDs generate high light output in a sleek, small device. The body is made of aluminum, and a unit with LED chips is installed in it.
A classic brake light can be used, but its functions will be fully utilized only with the CANsmart ™
LEDs: (6x) 1.0 Watt LED
Power Draw: 0.5 A
Tail / brake light adjustment
The rear brake light circuit in the CanSmart controller allows:
- light brightness adjustment
- brake light brightness adjustment
- non-blinking mode: the brake light lights up in the set brightness when braking
- flashing mode: during braking, the brake light flashes at a frequency of 4 Hz
- automatic mode: if the speed is higher than 50 km/h, the deceleration is higher than the deceleration threshold (default: 20 km/h/s) the brake light flashes
- if the deceleration is caused by active braking, the flashing will continue until both brakes are released
- if the deceleration is caused by engine braking, the flashing will continue until the deceleration reaches the deceleration threshold or the speed drops below 50 km/h. You can set the sensitivity of the deceleration activated by the flashing in the additional settings
- adjustable for California with automatic flashing
- flashing speed threshold: the brake light flashes only when the vehicle speed is above the driving speed threshold in the Extra setting. The driving speed threshold is set to 0 km/h by default, so you can see the flashing function when stopped. Increase the speed threshold if you want to prevent flickering when stopped or when the motorcycle is moving slowly.
Simple Circuit:
When this setting is enabled, all functions are disabled, 12V is output. Use this setting to power alternative accessories instead of the DENALI accessories.
The circuit is protected by an electronic fuse with a value determined by the fuse. It acts like a regular car fuse, but can be reset by turning the ignition off and on.
Additional parameters
| Category: | Auxiliary Headlights |
|---|---|
| Part type: | Lights |
| Universal - specific: | Universal parts |
Be the first who will post an article to this item!
The company was founded with the goal of providing innovative solutions that allow motorcyclists to push their boundaries and explore new environments without having to sacrifice their safety.
In 2022, DENALI officially joined forces with VisionX Lighting, a global leader in automotive lighting. This merger allowed them to further innovate and leverage their rich experience in the industry.
Main products and focus:
-
LED lighting: Their strongest segment is high-performance LED auxiliary lights for motorcycles. They use proprietary technologies that allow them to achieve strong light output with minimal energy consumption.
-
SoundBomb Horns: They also produce extremely loud horns that aim to attract the attention of careless drivers and thus increase the safety of the motorcyclist.
-
CANsmart controllers: These are "smart" controllers that allow you to integrate additional accessories (lights, horn) directly into the motorcycle's electronics (CANbus system). This allows, for example, to set the lights to behave intelligently according to the speed or braking of the motorcycle.
-
Mounting and connection kits: They offer specific mounting kits and wiring for specific motorcycle models, which makes installation easier and ensures that the accessory fits perfectly.
| Manufacturing company : | TLA Holdings, LLC (Mateřská společnost Denali) |
|---|---|
| Address : | 11090 N.E. 3rd St., STE 200, Bellevue, WA 98004 USA |