Denali DialDim Lighting Controller
Code: DNL.WHS.20500Product detailed description
The DialDim™ lighting controller allows you to independently turn on/off and continuously adjust the brightness of two sets of Denali DataDim auxiliary lights from a single consolidated wiring harness. Blue signaling for light set one and green for set two. To switch between the two circuits, simply double-click.
The control unit also features high beam, turn signal and horn inputs, which enable intelligent flashing functions, such as turning off the auxiliary lights with the turn signal control, flashing the auxiliary lights as a turn signal or rapidly flashing the auxiliary lights when honking.
The patented multi-color dimmer switch can do much more than just turn the lights on, off and adjust their brightness. For starters, it displays the exact intensity of both of your lights, so you'll never have to guess whether your lights are on or what intensity they're set to.
With electronically fused circuits, the switch can also display and allow you to select virtual fuse values for each circuit. If a short circuit occurs, the LED will illuminate red, providing real-time feedback and allowing the fuse to be reset.
Last but not least, the halo switch doubles as a battery monitor with a light-off function if the battery voltage drops below 10.8V.
On/Off and Dimming - Two sets of lights with a single DialDim™ controller.
High/Low Beam Sync - The auxiliary lights automatically switch between the selected low beam setting and full intensity in conjunction with the factory high beam switch.
Stealth Mode - A clever setting on the switch allows the auxiliary lights to be "off" under normal driving conditions, but to illuminate at full power when the flasher is used. Inputs from the turn signals and horn can also react in the same way.
Cancel with Turn Signal - when this function is enabled, the main lights (blue circuit) will be canceled together with the illuminated turn signal to prevent it from being hidden by the additional lights.
Additional turn signals - when this function is active, set of lights two (green circuit 2) will flash in sync with your factory turn signals.
Strobe with horn - the additional lights in both circuits will flash stroboscopically at a frequency of 4 Hz when the horn is honked.
Electronically fused circuits - both light circuits are electronically fused and can be set directly from the switch itself. The indicator will light up red to alert you when the circuit breaker is tripped.
Voltage Indicator - After starting the motorcycle, the switch indicator will flash green (battery voltage ok), or red, indicating a battery voltage lower than 11.8V.
Low Voltage Cutoff - If the battery voltage drops below 10.8V, the lights will not turn on, preventing further battery drain. The switch will flash 4 red LEDs.
Two fully independent light circuits
Eight intensity levels per circuit (5%, 15%, 30%, 45%, 60%, 75%, 100%)
Eight electronic fuse ratings (1A, 2A, 4A, 6A, 8A, 10A, 15A, 20A)
Five function input wires (ignition, high beam, horn, left turn, right turn)
Maximum current 20A per circuit (max. 30A total)
Operating voltage: 12 VDC
What's included?
(1x) DialDim™ Control Unit Harness
(1x) DialDim™ Multifunction Switch
(1x) 7/8" Switch Bracket for handlebars
(4x) Plug-&-Play light extensions
(1x) Universal input start cable harness
For specific motorcycles, the manufacturer offers cable harnesses with connectors, installation is then very simple (plug and play).
Plug-&-Play DialDim Wiring Adapter for Honda Africa Twin 1100
Plug-&-Play DialDim Wiring Adapter for Yamaha Tenere 700
DialDim Lighting Controller for BMW R1250GS
Additional parameters
| Category: | Auxiliary Headlights |
|---|---|
| EAN: | 810005872850 |
| Part type: | Lights |
| Universal - specific: | Universal parts |
List of discussions
Blikanie
Peter
The company was founded with the goal of providing innovative solutions that allow motorcyclists to push their boundaries and explore new environments without having to sacrifice their safety.
In 2022, DENALI officially joined forces with VisionX Lighting, a global leader in automotive lighting. This merger allowed them to further innovate and leverage their rich experience in the industry.
Main products and focus:
-
LED lighting: Their strongest segment is high-performance LED auxiliary lights for motorcycles. They use proprietary technologies that allow them to achieve strong light output with minimal energy consumption.
-
SoundBomb Horns: They also produce extremely loud horns that aim to attract the attention of careless drivers and thus increase the safety of the motorcyclist.
-
CANsmart controllers: These are "smart" controllers that allow you to integrate additional accessories (lights, horn) directly into the motorcycle's electronics (CANbus system). This allows, for example, to set the lights to behave intelligently according to the speed or braking of the motorcycle.
-
Mounting and connection kits: They offer specific mounting kits and wiring for specific motorcycle models, which makes installation easier and ensures that the accessory fits perfectly.
| Manufacturing company : | TLA Holdings, LLC (Mateřská společnost Denali) |
|---|---|
| Address : | 11090 N.E. 3rd St., STE 200, Bellevue, WA 98004 USA |