Denali DialDim Lighting Controller Yamaha Tenere 700 20-22

Product detailed description

Suitable only for Tenere 700 models, standard model with black and white LCD and classic bulb turn signals. LED turn signals have different connectors, motorcycles with color display have a different light connector, so the set is not compatible.

The DialDim™ lighting controller allows you to independently turn on/off and continuously adjust the brightness of two additional lights from a single consolidated wiring harness. Blue signaling for light set one and green for set two. To switch between the two circuits, just click twice.

The control unit is also equipped with inputs for high beams, turn signals and horn, which allow you to activate intelligent flashing functions, such as turning off the additional lights with the turn signal controller, flashing the auxiliary lights as a turn signal or rapidly flashing the additional lights when honking.

The patented multi-color dimmer switch can do much more than just turn the lights on, off and adjust their brightness. For starters, it displays the exact intensity of both of your lights, so you'll never have to guess whether your lights are on or what intensity they're set to.

With electronically fused circuits, the switch can also display and allow you to select virtual fuse values for each circuit. If a short circuit occurs, the LED will illuminate red, providing real-time feedback and allowing the fuse to be reset.

Finally, the halo switch doubles as a battery monitor with a light-off function if the battery voltage drops below 10.8V.

On/Off and Dimming - Two sets of lights with a single DialDim™ controller.
High/Low Beam Sync - The auxiliary lights automatically switch between the selected low beam setting and full intensity in conjunction with the factory high beam switch.
Stealth Mode - A clever setting on the switch allows the auxiliary lights to be "off" under normal driving conditions, but to illuminate at full power when the flasher is used. Inputs from the turn signals and horn can also react in the same way.
Cancel with Turn Signal - when this function is enabled, the main lights (blue circuit) will be canceled together with the illuminated turn signal to prevent it from being hidden by the auxiliary lights.
Auxiliary turn signals - when this function is active, set of lights two (green circuit 2) will flash in sync with your factory turn signals.
Strobe with horn - the auxiliary lights in both circuits will flash stroboscopically at a frequency of 4 Hz when the horn is honked.
Electronically fused circuits - both light circuits are electronically fused and can be set directly from the switch itself. The indicator will light up red to alert you when the circuit breaker is tripped.
Voltage Indicator - After starting the motorcycle, the switch indicator will flash green (battery voltage ok), or red, indicating a battery voltage lower than 11.8V.
Low Voltage Cutoff - If the battery voltage drops below 10.8V, the lights will not turn on, preventing further battery drain. Switch indication will be flashing 4 red LEDs.

Two fully independent light circuits
Eight intensity levels per circuit (5%, 15%, 30%, 45%, 60%, 75%, 100%)
Eight electronic fuse ratings (1A, 2A, 4A, 6A, 8A, 10A, 15A, 20A)
Five function input wires (ignition, high beam, horn, left turn, right turn)
Maximum current 20A per circuit (max. 30A total)
Operating voltage: 12 VDC

What's included?

(1x) DialDim™ Control Unit Harness
(1x) DialDim™ Multifunction Switch
(1x) 7/8" bracket handlebar switches
(4x) Plug-&-Play light attachments
(1x) Tenere 700 wiring harness