Hepco Becker LED additional headlight set "Nova" for drop frames Ø18-25mm with universal mounting

Product detailed description

The "Nova" LED additional headlight set from HEPCO&BECKER provides you with everything you need to improve the visibility and safety of your motorcycle.

Powerful LEDs with two switching levels at $2500\text{lm}$ - $4350\text{K}/-5500\text{K}$12V, $25$ per headlight
ECE tested and approved, therefore no individual approval is required (please observe country-specific legislation when installing)
Improved lighting conditions in traffic
Universal attachment to the engine or tank crash bar with a pipe diameter $\text{Ø}18\text{mm}–Ø25\text{mm}$, can be mounted standing or suspended
Complete headlight set; Including 2x additional LED headlights, 1x switch, 1x cable set, 2x clamps incl. reduction sleeves, 1x instructions, 1x tool set
Connection is only via battery, no connection to the vehicle's electrical installation is necessary
No external control by third parties, thanks to a special control unit with automatic voltage regulation
Waterproof and dustproof according to IP67
Headlights can be flexibly switched on citation-end-22"> using the handlebar switch

Note:
The lights can be turned on approximately $5–15\text{seconds}$ after starting the engine. To activate the circuit, a voltage of $13.1\text{V}$ must be applied to the wiring harness control unit. In older vehicles, this can be achieved by briefly increasing the engine speed.
Switching off must be done manually using a switch. The NOVA LEDs remain lit even after the engine is turned off until the voltage limit of $11.8\text{V}$ is reached. Only when the voltage drops below this limit will the lights be automatically switched off by the control unit. When switched on again (after the control unit timeout has expired), the voltage limit is checked again $13.1\text{V}$.