HOLDER 2.0
Code: DR2-FRelated products
Product detailed description
| HOLDER 2.0 is a unique smartphone holder that combines variability and versatility with the advantages of stainless steel. This has resulted in the safest phone holder you can imagine on a motorcycle. Using HOLDER 2.0 is completely simple, quick and easy. You can insert your phone with one hand. The extremely soft padded grips pull the phone body down and thanks to the mechanical lock the phone cannot fall out even when riding off-road. If you stop for a rest, or at a gas station, you can leave your phone in HOLDER 2.0 without any worries. Thanks to the lock you can secure it against unauthorized access. The structure is made of 2mm thick stainless sheet metal. The individual parts are precisely burned using a laser, bent on CNC machines and then machine-polished and blasted before assembly. The edges are pleasantly rounded and the surfaces are matt. The screws are stainless steel and the nuts are self-locking. The high-quality lock supplied with a pair of keys is nickel-plated. |
| Thanks to three silent blocks, the HOLDER 2.0 can also dampen unwanted vibrations and shocks from the motorcycle, which could negatively affect the phone body. Fine vibrations are further dampened by EPDM padding and five O-rings in a C-shaped recess in the front contact surface. The phone body is thus very securely stored. HOLDER 2.0 is fully compatible with most phones on the market. The grips, which surround the phone, can be continuously adjusted in size from 130 x 68 x 9mm to a respectable 188 x 90 x 27mm. The side supports are exactly where there are no buttons, power, readers, etc. on any phone. So there is no risk of collision or unintentional pressing of buttons. The outer grips are designed for easy access to the power connector, which is usually on the bottom edge in the middle. On the back there is a mounting surface with holes in a spacing of 38 x 30mm. HOLDER 2.0 is therefore compatible with GPS holders. For optimal placement of the HOLDER 2.0 and your phone on your motorcycle, we recommend choosing one of the universal mounting accessories from Garmin, RAM Mounts, Givi, SW-Motech and others. HOLDER 2.0 is fully compatible. |
NOTE: We recommend having your phone in at least a basic silicone case, which will protect it not only when handling and inserting it into the holder. The holder can be mounted on the bars of the BMW R1200GS, R1250GS, F850GS, Honda CRF1000L, CRF1100L and Yamaha Tenere 700.
on the bars using a sleeve (not included):
Sleeves 12 / 16 / 22 / 28 / 32 mm
Attention, direct mounting of the holder on the sleeve is only possible with smaller sleeves 12, 16 and 22 mm.
using a positionable holder:
GPS holder for 10-12mm bar
Mounting kit for 12-16 mm bars
Mounting kit for 12-16 mm bars
Mounting kit for 2.0 handlebar holder
Mounting kit - bridge
using a specific motorcycle mount:
Mounting kit KTM 1290 Adventure -21
Mounting kit KTM 1290 Adventure -20
KTM 790 Adventure mounting kit
Additional parameters
| Category: | Holder 2.0 |
|---|---|
| Part type: | Navi / electronics |
| Universal - specific: | Universal parts |
Be the first who will post an article to this item!
The company was founded in the Czech Republic and is known for the fact that all production takes place here. It focuses on quality and functionality, not mass production.
The founders drew on their own experience and disappointment with the shortcomings of existing holders on the market. The goal was to create a product that would not only hold firmly, but would also be resistant to vibrations and be universally applicable. The holders are designed to fit most motorcycles without complex modifications.
The main product of the DRZAK2.0 brand is various types of holders, which differ in the way they are attached to the motorcycle. They have several main lines:
-
Handlebar holders: The most universal solution that is easy to install on regular handlebars.
-
Steering neck holders: These holders are designed for sports motorcycles where there is no space on the handlebars. They use a hole in the steering head.
-
Mirror or screw mounts: Smaller but practical mounts that are suitable for scooters and motorcycles where there is not much space.
Key features of DRZAK2.0 products:
-
Anti-vibration system: Their mounts are equipped with special anti-vibration elements that protect the phone from damage. This is absolutely essential for motorcycles with higher vibrations.
-
Easy assembly: The products are designed so that everyone can assemble them themselves without the need to visit a service center.
-
Quality materials: Strong materials are used for production that can withstand demanding conditions, such as weather changes or shocks.
| Manufacturing company : | Racetech S.p.A. |
|---|---|
| Address : | Ing. Jakub Sobotka. Litvínovice - Mokré 73, 37001 |