Loboo T10 Tubeless Tire Repair Kit

Product detailed description

The T10 kit combines pliers, a reamer and a threading needle into a single pocket-sized tool.

You are sitting on a dusty roadside in the middle of nowhere and you see a screw head sticking out of your rear tire. Pressure is dropping fast. Your partner is already searching through side panniers – in one pocket they are hunting for pliers, in the second a reamer and in the third a threading fork. Meanwhile, you pull out the T10, use the integrated pliers to remove the screw, attach the reamer tip, prepare the hole, insert the needle and repair the tire. One tool. No searching. No scattered tools.

That is the power of the LOBOO T10 kit. It is not some cheap kit with plastic handles that will snap exactly when you need them most. It is a precisely crafted stainless steel multi-tool designed specifically for emergency tubeless tire repairs – created by riders who were tired of carrying three different tools for one and the same job.

Universal compatibility: Works with any tubeless tire.

The T10 is a standalone tire repair tool, not an accessory intended for a specific motorcycle. It works with any tubeless motorcycle tire regardless of brand, model or year: adventure (ADV), sport-touring, cruiser or dual-sport. If your motorcycle has tubeless tires, the T10 is the solution. If necessary, it can also be used for tubeless tires on cars, ATVs or UTVs.

Why you shouldn't be without it in your gear:

• Integrated pliers: Remove studs, screws and debris directly without the need to carry a separate multitool. The pliers arms fold into the tool body when not in use: no noise, no unnecessary dimensions.

• Modular heads: The reamer and threading needle are attached via a dedicated interface on the pliers arm. You can swap them in seconds. Both tools are stored in an internal compartment in the body, so nothing gets lost.

• Internal storage space: The hollow body holds repair plugs, glue and both heads. Everything is immediately at hand. (Vulcanizing plugs and glue are sold separately – see note below.)

• Waterproof hard case included: The T10 is supplied in a waterproof and shockproof case with foam padding and an illustrated repair manual on the inside of the lid. Just throw it in a pannier, a crash bar bag or a tool kit and forget about it until you need it.

• Stainless steel construction: No plastic handles. No pressed sheet metal joints. The T10 tool is made of machined stainless steel, which will not break, rust or bend under the pressure required to drill and repair a tough motorcycle tire.

• T-handle ergonomics: When opened, the pliers create a natural T-handle, providing effective leverage when pushing the reamer or threading needle into a stiff tire. This is more important than most riders realize – until they find themselves on their knees on gravel trying to push a plug through a tire like a Michelin Anakee Adventure.

• Pocket size: Dimensions in the closed state are only 147 mm × 32 mm. Easily fits into a jacket pocket. When fully loaded, it weighs less than 200 g.

• Includes cutting blade: The tool includes a folding razor for trimming excess plug material flush with the tire surface after completing the repair.

Package contents:

• 1× T10 multi-function pliers (with internal storage space)

• 1× reamer needle / reamer (stainless steel, textured handle)

• 1× threading needle for plugs (stainless steel, fork tip)

• 1× folding cutting blade

• 1× waterproof hard case with foam padding

Note: Vulcanizing plugs and rubber glue/sealants ARE NOT included in the package